Transmission: Torque Specs (Getrag446 6-Speed W6MG1)
Written by: Bret Brinkmann
It took me a while but I finally squeazed the torque specs out of CRS. I don't know if anyone else has posted these yet but if anyone wants to know here they are. The 1st number is the EV#. I believe this to be the CRS part numbers found on the exploded view. The exploded views of both 5 and 6 speeds can be found on the thread entitled "update on CRS". The 2nd is the part # (don't know if they are Getrag or what), followed by a description, the torque, and then the station. I don't know what the station #'s are yet but in case they end up being useful here they are. This is all for the W6M (446) family (product group).
| EV # | Part # | Notes | Torque | Station |
|---|---|---|---|---|
| D27 | 4467082700 | bolt-hex differential M10X30 (w/Loctite242) | 52 +/- 2 lb-ft | 1 |
| C99 | 9000141010 | bolt-hex reverse idler gear | 17 +/- 1 lb-ft | 3 |
| C96 | 4467082600 A | bolt-flange M8X30 reverse idler gear | 17 +/- 1 lb-ft | 3 |
| C96 | 4467082500 | bolt-flange M8X30 reverse idler gear | 17 +/- 1 lb-ft | 3 |
| B62 | 9000033612 | bolt M6X20 retainer - bearing | 90 +/- 9 lb-in | 3 |
| B59 | 2827613610 | screw-hex M20X27 input shaft rear bearing | 70 +/- 3.6 lb-ft | 3 |
| B36 | 9000141210 | bolt-hex M6X12 oil tank | 54 +/- 6 lb-in | 4 |
| B54 | 4467082500 | bolt-flange M8X30 rear cover to gear housing | 18 +/- 2 lb-ft | 4 |
| E69 | 9000019811 | bolt stopper shift gear housing to clutch housing | 17 +/- 1.5 lb-ft | 4 |
| B41 | 4467082600 | bolt-flange M8X35 | 17 +/- 1 | 5 |
| E81 | 9000020510 | bolt-hex detent cover M6X16 | 90 +/- 9lb-in | 9 |
| E89 | 9009086010 | screw shift plunger M8X20 | 18 +/- 2 lb-ft | n/a |
| E61 | 44070666600 | bolt shift/select lever M8X25 | 18 +/- 2 lb-ft | 6 |
| E86 | 9000140910 | bolt select shaft plate M6X18 | 90 +/- 9 lb-in | 6 |
| E74 | 446008600 | cover-damper reverse | 41 +/- 3.5 lb-ft | 6 |
| E71 | 4469088100 | adapter-reverse damper | 48 +/- 3.6 lb-ft | 6 |
| E63 | 4460087900 | retainer-detent M20X1.5 | 48 +/- 3.6 lb-ft | 6 |
| B52 | 9000022115 | plug-drain 18X1.5 rear cover | 26 +/- 3 lb-ft | 7 |
| B32 | 9000022215 | plug oil fill M18X1.5 gear housing | 26 +/- 3 lb-ft | 7 |
