Transmission: Torque Specs (Getrag446 6-Speed W6MG1)

Written by: Bret Brinkmann

It took me a while but I finally squeazed the torque specs out of CRS. I don't know if anyone else has posted these yet but if anyone wants to know here they are. The 1st number is the EV#. I believe this to be the CRS part numbers found on the exploded view. The exploded views of both 5 and 6 speeds can be found on the thread entitled "update on CRS". The 2nd is the part # (don't know if they are Getrag or what), followed by a description, the torque, and then the station. I don't know what the station #'s are yet but in case they end up being useful here they are. This is all for the W6M (446) family (product group).

EV #	Part #	Notes	Torque	Station
D27	4467082700	bolt-hex differential M10X30 (w/Loctite242)	52 +/- 2 lb-ft	1
C99	9000141010	bolt-hex reverse idler gear	17 +/- 1 lb-ft	3
C96	4467082600 A	bolt-flange M8X30 reverse idler gear	17 +/- 1 lb-ft	3
C96	4467082500	bolt-flange M8X30 reverse idler gear	17 +/- 1 lb-ft	3
B62	9000033612	bolt M6X20 retainer - bearing	90 +/- 9 lb-in	3
B59	2827613610	screw-hex M20X27 input shaft rear bearing	70 +/- 3.6 lb-ft	3
B36	9000141210	bolt-hex M6X12 oil tank	54 +/- 6 lb-in	4
B54	4467082500	bolt-flange M8X30 rear cover to gear housing	18 +/- 2 lb-ft	4
E69	9000019811	bolt stopper shift gear housing to clutch housing	17 +/- 1.5 lb-ft	4
B41	4467082600	bolt-flange M8X35	17 +/- 1	5
E81	9000020510	bolt-hex detent cover M6X16	90 +/- 9lb-in	9
E89	9009086010	screw shift plunger M8X20	18 +/- 2 lb-ft	n/a
E61	44070666600	bolt shift/select lever M8X25	18 +/- 2 lb-ft	6
E86	9000140910	bolt select shaft plate M6X18	90 +/- 9 lb-in	6
E74	446008600	cover-damper reverse	41 +/- 3.5 lb-ft	6
E71	4469088100	adapter-reverse damper	48 +/- 3.6 lb-ft	6
E63	4460087900	retainer-detent M20X1.5	48 +/- 3.6 lb-ft	6
B52	9000022115	plug-drain 18X1.5 rear cover	26 +/- 3 lb-ft	7
B32	9000022215	plug oil fill M18X1.5 gear housing	26 +/- 3 lb-ft	7