Tuning: Adapt DIY Datalogger cable for 91-95
Jump to navigation
Jump to search
91-95 Cars, having a non OBD2 are kinda harder to datalog with most of the commercial readers unless you got a specialized product or a really good and expensive solution, but with this you will be able to log your car and build this cable with less than 20 dollars.
Disclamer, this information is out there, either on DSM forums or the 3si forum, the 94-95 cable is pretty much Gatecrasher idea, not taking credit, just put this so everyone can build one.
You will need:
2G ECU (94-95)
| Pos | Description | Mouser # |
|---|---|---|
| R1, R2, R6, R7 | 560 Ohm 1/4w resistor | Example |
| R3, R4, R5 | 4.7k ohm 1/4w resistor | Example |
| T1 | BC556 / 2N3906 | Example |
| T2 | BC546/2N3904 | Example |
| J1 | 9 Pol Dsub female | Example |
| - | D-sub housing | Example |
| J2 | 16 pin OBD2 connector | Example |
| - | vero board | Example |
1G ECU (91-93)
| Pos | Description | Mouser # |
|---|---|---|
| D | 1N914 | Example |
| R | 10k ohm 1/4w resistor | Example |
| J1 | 9 Pol Dsub female | Example |
| - | D-sub housing | Example |
| J2 | 12 pin OBD1 connector | Example |
| - | vero board | Example |
