HVAC: Repair Electronic AC Display
Revision as of 17:04, June 29, 2012 by Stealthify (talk | contribs) (Created page with "Category:How To Category:HVAC There is a resistor on the back of the circut board that needs replacement. Pull it apart and look for R-38. It may be burnt, and replac...")
There is a resistor on the back of the circut board that needs replacement.
Pull it apart and look for R-38. It may be burnt, and replace it with a 1ohm resistor.
Source:
- http://www.3si.org/forum/showthread.php?t=288465&highlight=ac+control
- http://www.3si.org/forum/showpost.php?p=3150971&postcount=6
Von(xwire) from us3s.org has done this on a couple of them with good results.
